Many furniture manufacturers have a lot of confusion in the choice of ABS edge banding and PVC edge banding, and it is not clear which edge banding is suitable for the specific edge banding application process.
Now let's popularize the basic understanding of ABS edge banding and PVC edge banding. Only by recognizing the difference in the use of the two kinds of edge sealing strips, and the advantages and disadvantages of their application, can it be convenient to carry out the edge sealing work. Nowadays, there are two kinds of edge bands commonly used in edge banding operations: one is ABS edge band; the other is PVC edge band. Using ABS edge banding to seal the edge, its edge banding effect is better than PVC edge banding, although the cost of the former edge banding is relatively high, but it is still more and more favored by the market.
Our products also include Pvc Solid Color Edge Banding, which is a thermoplastic coil formed by mixing and pressing with polyvinyl chloride as the main raw material, adding plasticizers, stabilizers, lubricants, dyes and other auxiliaries together; There are Pvc Woodgrain Color Edge Banding strips, which are suitable for wooden floors. The edge strips are wood grain color, and the degree of reduction is 100%; there are also Pvc High Gloss Edge Banding strips, which can make furniture more beautiful, and plate edge sealing. After that, the internal structure and material cannot be seen from the side, and the same color edge banding is also used for the general edge banding, so that the overall uniform furniture is more beautiful in appearance; there is also the PVC Suppermatt Edge Banding, which everyone chooses At the same time, it should be consistent with the color of your own floor in all aspects; there is also a PVC Stone Color Edge Banding, which is close to the color of marble, which meets all aspects of the home. If you want to know more, welcome to consult us, we have a large stock in stock and will serve you wholeheartedly!
Fillers are used in many different materials to reduce costs. During the production of PVC edge banding, an appropriate amount of filler will be added, which can reduce its production cost, but the cost reduction is often reflected in the appearance of white edges after trimming (Odeya has solved the problem of trimming through the optimization of the formula. whitening problem). However, there is no filler added in the ABS edge banding, which increases the production cost to a certain extent. However, the advantage of this compared with the PVC edge banding is that the rounded corners after trimming are relatively smooth, and the surface of the ABS edge banding is more impact-resistant. Generally, it is not a particularly strong impact, and it will not cause abnormal conditions of the edge banding.
There are also certain differences in temperature resistance between ABS edge strips and PVC edge strips. ABS edge banding can withstand high temperature to 99 degrees, the state change occurs; while the shrinkage of PVC edge banding generally needs to be at a high temperature of 70 degrees. Regardless of the material of the edge banding, after being deformed by heat, it will also lead to various conditions such as sheet deformation.
In terms of chemical composition stability, ABS edge banding also has a greater advantage than PVC edge banding, which has a lot to do with the formula of the material. ABS edge banding has good corrosion resistance and wear resistance. Even if it is drizzled with soy sauce, diesel oil and peanut oil, it will not affect its material; on the contrary, PVC edge banding is easily affected by the chemical properties of its material. Aging and damage due to the influence of the external environment.
The environmental protection of wood-panel structural products has been paid more and more attention by the public, and wood products with strong smell are unacceptable. The material used for ABS edge banding has no smell and no reaction. Even if it is burned, its smell will not cause pollution hazards, which just caters to the environmental protection concept recognized by the public; and the plastic smell on the PVC edge banding is very heavy. , the smell is like new after a long time, and after burning, it will release toxic gases such as dioxin.
Compared with ABS edge banding, PVC edge banding has a certain gap with ABS in terms of temperature resistance, stability, environmental protection and other aspects. And ABS edge banding is not as good as PVC edge banding, maybe only flexibility and price.
