Nowadays, veneer furniture is more and more widely used. The use of natural veneer composite furniture not only has the effect of solid wood, but also saves a lot of costs. In the production process of solid wood composite furniture, in order to achieve the effect of solid wood, the veneer edge banding has played a great role. The veneer edge strip can play an important role in beautifying the edge of the furniture and protecting the furniture. However, improper protection of veneer edge strips can also cause furniture deformation and delamination.
Selection Criteria For Veneer Edge Banding
1. Good flexibility, even if it is sealed on a plate with a small radius, it will not break. Its edge sealing gap is very small, basically no gap can be seen, and the edge sealing strip and the cabinet are particularly airtight.2. The edge band has good dimensional stability and will not shrink or expand excessively due to large temperature differences.
3. Look at the hue and surface roughness of the veneer edge banding. The color of the good veneer edge banding surface is also very important. Whether the color is close to the customized product and gorgeous. If the surface is very rough and there are scratches, the quality will definitely not be much better. This is the surface quality problem of the veneer edge banding. This has nothing to do with the quality of the inner material of the veneer edge banding. The production process and the production technical skills of employees. A good veneer edge band is: the surface must be smooth, no or very little foaming, no or little stretch, moderate gloss, not too bright or too matte (unless there are special requirements).
4. Look at the flatness of the surface and bottom surface of the veneer edge banding, whether the thickness is uniform, otherwise it will lead to the joint of the veneer edge banding and the plate, the glue line is too conspicuous or the gap between the plate and the veneer edge banding is too large to affect the overall of beauty. Details determine success or failure, and often a small detail problem may bring about an embarrassing situation where the overall effect is not good.
5. Whether the strength of the veneer edge banding is OK and whether it is elastic. High strength means good wear resistance, and the corresponding quality is also better. If the strength is too high, it also means that the processing is difficult. Low elasticity means low wear resistance and low anti-aging ability. In addition, according to the needs of actual production, it is generally necessary to manually trim the edges, so soft points can be appropriately made, and automatic edge banding machines can be appropriately made hard points.
6. Whether the adhesive of the veneer edge banding strip is evenly applied, and whether it is easy to fall off during use.
Natural, environmentally friendly and healthy - we have been committed to creating products that are closer to nature! Your support is our greatest motivation!
Oudeya has always adhered to the corporate philosophy of establishing a business with integrity, self-discipline, being responsible to customers, and being responsible to the vast number of end consumers, providing you with EU quality standards for furniture edge banding material solutions. Our products cover thin edge series, thick edge series, aluminum edge series and special-shaped series, including PVC, ABS, PP, PMMA and other edge sealing materials.