In the specific connection, the bonding surface of the hot melt film can be placed on the edge of the wardrobe, and then ironed with an electric iron to make the bonding film adhere to the board. Then tear off the paper on the back and leave the adhesive film on the edge of the wardrobe door to achieve a bonding effect. But when using an electric iron, the temperature should be slightly lower, about 100 degrees. After natural cooling, it can play a role in repairing.
If you choose a solid wood wardrobe at home, you must pay attention to maintenance work, otherwise you will encounter the season of alternating hot and cold, because the moisture content has changed, which will cause the problem of wood cracking. Once the surface cracks, it will affect the aesthetics, so it needs to be remedied in time, otherwise it will affect the service life.
Before repairing, you can prepare some waste newspapers, cut them into small pieces, add alum to the pieces, stir well, and pour the mixture into a container. Add a little water, stir again, and cook on the fire until a paste.
During the cooking process, you need to constantly stir evenly, then fill the gaps with the paste and let it blow naturally. Finally, varnish is applied, and the same paint as the original solid wood is applied later, which can play a role in repairing, and the original cracks are not visible at all.
