Among the five general-purpose plastics, ABS is a material with the best comprehensive mechanical properties. It has high strength and high toughness, and is a strong and tough material. The operating humidity of ABS products (ABS Solid Color Edge Banding) is -40°C~100°C, and the operating temperature of PVC products is -30°C~80°C. Compared with PVC, ABS products have a wider application range. The edge banding made of ABS inherits the excellent properties of ABS itself. Compared with the traditional PVC edge banding, it not only has the same strength, but also has the advantage of strength and toughness that PVC edge banding cannot match. It is a new It is an ideal material for edge sealing and decoration of a generation of high-end furniture.
ABS edge banding unit color ABS edge banding has the characteristics of wear resistance, fire resistance, oil resistance, moisture resistance, acid and alkali resistance, and has the advantages of excellent flexibility, strong adhesion after bonding, and not easy to fall off. The standard thickness is 0.2~0.4mm, the width is about 25mm, and the length is 1000~2000mm. ABS edge banding has excellent bending performance, and it will be better after being heated, but it has the defect of being easy to break. Both manual and mechanical edge banding are acceptable in operation; the requirements for adhesives such as hot melt adhesive, universal adhesive, and white latex are not high; adhesives can be selected arbitrarily in the market if flat paste and roll paste are used; hot melt adhesive is selected as the glue For the mixture, the temperature of the melt glue is controlled at 120°C~160°C, the pressure is 4-62-2, the assimilation time is 20~50 seconds, and the ambient temperature is 15°C when pasting indoors.
In view of the fact that ABS edge banding single color is more permeable to hot melt adhesives and all-purpose adhesives than PVC, it is necessary to reduce the amount of glue coating when sticking to the board, and generally control it within 6-8g/linear meter vanwey. In the mechanical edge banding, the visual effect is that the adhesive layer is evenly coated, and the double and double lines are clear; the running speed of the mechanical glue coating is 30~50 m/min, and the running speed of the edge banding and pasting is the fastest when sealing the edge with the edge banding strip. , which can not only ensure the paste quality, but also improve work efficiency.